Frequently Viewed

Cicada X – Xtra

Cicada X . Xtra- 2016 version
There was many Cicada pattern that I have tied… this is one which I like most and simplified.
Materials list:
 Close Cell foam – 3mm thk
Luminous bead + mono line
rubber legs
UV flashabou
Bucktail
some transparent fiber from your paint brush
Toothpick or Ice cream stick
 Loons soft head
Markers
Picture step by step tying instruction:
Cut the foam as per the shape, insert a black foam and fused both together ( edge only )
Use a nail polisher as the support… insert your foam body
Tie in the segment
trim the edge so the body looks nice

 

Use a permanent marker and paint the body to mimic the colour of the cicada in your area
Use a toothpick, punch a hole at the center of bottom ( to the location where your hook will peel thru ), insert the hook with the hook eye first… this will make sure your hook will always at the right position
Tie in a pair of toothpick or a pre-cut Ice cream stick… these will create a good ‘flat’ base for your foam to tie on and will stop the foam from twisting
Tie down the foam body, also tie down the black foam, you may choose to drop a drop of super glue before you tie it down but the flat wooden base is actually pretty strong to hold the foam.
Cut the head profile foam piece and insert in from front
Tie in the eye… and then tie in the paint brush fibers, flashabou and bucktail ( or any long deer/elk hair you you have )
fold the foam over, drop a drop of super glue and tie down just behind the eye
use a needle to bring the pre-knoted rubber legs thru the foam
apply some Loons soft head on the foam, this will help keep your marker’s colour and protect the fly

 

The soft head will also keep the rubber legs in place.
Cheers and Happy tying

About The Author

0 thoughts on “Cicada X – Xtra

Select your currency
USD United States (US) dollar